新闻资讯

NEWS

  • 消防排烟风机的日常清理及保养你知道吗?
  • 本站编辑:杭州度能环保通风设备厂发布日期:2019-02-27 17:03 浏览次数:

随着社会经济的快速发展,我们不难发现民用高层建筑、公路隧道和地下车库都可以看到排烟风机的应用。我们在安装时通常会悬着排烟风机时通常会安排在排烟区的同区或者上层,因为是安装在室外,所以排烟风机的去清理就非常重要了,只是这种日常的清理和保养应该很少人会做,毕竟这种清理并不是很方便,但是清理可以延长排烟风机的使用寿命,下面我们就来讲一讲排烟风机的日常清理,希望对您有一定的帮助。


With the rapid development of social economy, it is not difficult to find the application of smoke exhaust fans in civil high-rise buildings, highway tunnels and underground garages. When we install smoke exhaust fans, we usually arrange them in the same or upper level of the smoke exhaust area. Because they are installed outdoors, it is very important to clean up the smoke exhaust fans, but few people can do this daily cleaning and maintenance. After all, this cleaning is not very convenient, but it can prolong the service life of the smoke exhaust fans. Here we go. Talk about the daily cleaning of smoke exhaust fans. I hope it will be helpful to you.


断开主电源,挂上“禁止合闸”标志牌,检查电机接地线是否良好。我们应该调整好消防排烟风机使用的皮带的松紧度,用手盘动风轮,调查转变是不是稳。清洗电机及风轮、过滤器及机壳内部。关于油漆掉落处应补刷。消防排烟风机向转变部位填加润滑油,以确保联轴节及轴承的灵敏性及稳定性。消防排烟风机查看调节阀机械开闭动作是不是牢靠、灵敏,开闭视点象征明晰。消防排烟风机查看与替换各接合面间的垫片和密封填料,一定要做好这些垫片和密封填料的添加工作。消防排烟风机可以进行手动开机查看指示灯及电流、电压表作业,检查他们是否正常,还要检查该风机的各部件工作是否有异声,三相电流值是否平衡。


Disconnect the main power supply and hang the "No Closing" sign to check whether the grounding wire of the motor is good. We should adjust the belt tightness of the fire exhaust fan and move the wind wheel by hand to investigate whether the change is stable. Clean motor and wind wheel, filter and casing. Paint drops should be repaired. In order to ensure the sensitivity and stability of the coupling and bearing, lubricating oil is added to the changing part of the fire exhaust fan. Fire exhaust fan checks whether the mechanical opening and closing action of the control valve is reliable and sensitive, and the opening and closing point of view is clear. Fire exhaust fan to check and replace gaskets and sealing fillers between the joints, we must do a good job of adding these gaskets and sealing fillers. Fire exhaust fan can start manually to check the operation of indicator lamp, current and voltmeter, check whether they are normal, and check whether the components of the fan work abnormally, whether the three-phase current value is balanced.


  • 上一篇:没有了